Skip to product information
2020+ Corvette C8 Stingray Pure Performance LA Carbon Fiber Front Lip / Splitter - Pure Performance

2020+ Corvette C8 Stingray Pure Performance LA Carbon Fiber Front Lip / Splitter

$799.00 USD
Shipping calculated at checkout.

Pure Performance
LA Carbon Fiber Front Lip / Splitter
2020+ Chevrolet Corvette C8 Stingray
3-Piece Design Real Carbon Fiber No Drilling Required OEM Screw Clip-On

The Pure Performance LA Carbon Fiber Front Lip takes the C8 Stingray's aggressive front end to its next visual chapter. This full 3-piece carbon fiber splitter is crafted from real carbon fiber - not wrapped, not painted - with a clean gloss weave finish that catches light the same way the rest of the C8 does. The center blade drops the front profile and pushes the visual weight of the car forward, while the two outer winglets frame the bumper with the kind of angular detail that makes the C8 look like it belongs on a track paddock. No drilling, no modification - the entire system clips directly onto the OEM factory screws and removes just as cleanly. Professional installation recommended but not required.

Brand Pure Performance
Product LA Carbon Fiber Front Lip / Splitter
Material Real Carbon Fiber - Gloss Weave
Construction 3-Piece (Center Blade + 2 Side Winglets)
Finish Gloss Carbon Fiber
Installation OEM Screw Clip-On - No Drilling
Hardware All Mounting Hardware Included
Quantity 3-Piece Complete Set
  • Real Carbon Fiber Construction - Not Wrapped, Not Painted
  • 3-Piece Design - Center Blade and Two Outer Side Winglets
  • Gloss Carbon Weave Finish Throughout
  • Clips Directly onto OEM Factory Screws - Zero Drilling Required
  • Removable - Returns to Stock with No Marks or Damage
  • Drops Front Profile for a More Aggressive Stance
  • Angular Winglet Detail Frames the C8 Bumper Perfectly
  • All Mounting Hardware Included
  • Designed and Fitted Specifically for the C8 Stingray Front Bumper
  • Professional Installation Recommended

No drilling, no cutting, no modification to your factory bumper. The LA splitter clips directly onto existing OEM hardware for a clean, reversible installation.

  • 1
    Prep the bumper Clean the front bumper surface and locate the OEM factory screw positions along the lower lip.
  • 2
    Position the center blade Align the center section of the splitter with the factory screw points and clip it into position.
  • 3
    Attach the side winglets Clip the two outer winglets into the factory screw positions at each corner of the bumper.
  • 4
    Secure all hardware Fasten all included mounting hardware and verify all three pieces are seated flush and evenly.
  • 5
    Final inspection Check fitment from the front and both sides. No gaps, no drilling, no damage to the factory bumper.
Compatible Vehicles 2020+ Chevrolet Corvette C8 Stingray
  • All 2020 and Newer C8 Stingray Trims - 1LT / 2LT / 3LT
  • Z51 and Non-Z51
  • Does Not Require Bumper Removal
  • OEM Factory Screw Positions Used - No Additional Hardware Needed

Not compatible with the C8 Z06, ZR1, or E-Ray front bumper. Please confirm your trim before ordering.

Important Notice

  • Carbon fiber products may have minor surface variations in the weave pattern - this is a characteristic of real carbon fiber and is not considered a defect.
  • Inspect your item immediately upon delivery and report any shipping damage within 48 hours with photos.
  • This product is designed for the C8 Stingray factory bumper - verify fitment before installation.
  • Returns are accepted on unused, uninstalled items within 7 days of delivery.

Disclaimer

Carbon Fiber Characteristics

Real carbon fiber products will exhibit slight variations in weave pattern, gloss level, and surface texture. These are inherent characteristics of the manufacturing process and are not considered defects. Each piece is inspected before shipment.

Installation

This product is designed for clip-on installation using OEM factory screw positions. Improper installation or use of non-included hardware may cause damage to the bumper or the product. We strongly recommend professional installation.

Road Use

Front lip and splitter products are susceptible to damage from road debris, speed bumps, and low ground clearance situations. Damage caused by road use is not covered under warranty.

Returns and Warranty

Unused, uninstalled items may be returned within 7 days of delivery in original packaging. Installed items are not eligible for return. Manufacturing defects are covered under a 90-day warranty from the date of purchase.